Victorian Quarry Tiled Floor Restoration

This original Victorian quarry tiled floor was laid in the hallway of an old 1897 cottage dating back to built in the Norwich village of Great Melton. The owner was able to show me pictures from the early 1900s showing the then owner and the floor. It had been covered by carpet for several years and was covered in paint and other debris from the renovation work being carried out.

Victorian Floor Before Cleaning

Cleaning the Victorian Quarry Tiled Floor

You can see from the pictures above that the floor was in quite a state and it took a day to whole day to clean. The floor area was only around 6m2 but consumed two litres of Tile Doctor Remove & Go which is a very strong tiled floor stripper that will just about shift anything and a further 2 litres of Tile Doctor Pro-Clean getting it clean. Once that was done we washed down the floor to neutralise the floor and left it to dry so it could be sealed the next day

Victorian Floor Before Cleaning

Sealing the Victorian Quarry Tiled Floor

We returned the next day to seal the floor, for this we used four coats of Tile Doctor Seal and Go which gives a nice low sheen finish and is recommended for these types of floor, one litre of sealer was sufficient to do the job. You can see a huge improvement from the photographs which clearly show a stunning transformation.

Victorian Floor After Cleaning and Sealing Victorian Floor After Cleaning and Sealing

 

Victorian Quarry Tiled Floor Restoration