Sandstone flagstone floor cleaned in Boxford, Suffolk

This sandstone flagstone floor measured around 15m2 and was installed in a house in the village of Boxford, Suffolk, you can see how dark the stone had become from the build-up of dirt and soil over time, clearly they were in need of a deep clean and seal.

Sandstone Flags before cleaning Sandstone Flags before cleaning

Cleaning Sandstone

We cleaned the floor using Tile Doctor Pro-Clean diluted with 10 parts warm water and worked in using a Black Scrubbing pad. This action certainly gave the floor a good clean but there were some staining that was proving stubborn to shift so we tried a stronger product called Remove and Go combined 50/50 with NanoTech UltraClean which add nano sized abrasive particles into the mix. We left the resulting formula to soak into the sandstone for about a while and then used a steam to penetrate deep into the pores of the stone and lift out the dirt, this did the trick and so we then removed the cleaning products with a wet vacuum and washed down the floor with clean water to neutralise the floor before sealing and left for the evening so the floor could dry overnight.

Sealing a Sandstone Tiled Floor

We came back the next day, the floor had dried overnight so we proceeded to seal the Sandstone with Tile Doctor Seal and Go which gives a nice low sheen finish; Sandstone is fairly porous so it took five coats of sealer in the end. Seal and Go is a topical sealer which works well on Sandstone to really bring out the veins and natural colour in the stone, it also leaves them a lot easier to clean as flagstones invariably have a rough riven surface.

Sandstone Flags after cleaning Sandstone Flags after cleaning

 

Sandstone Floor Cleaned and Sealed in Suffolk

Sandstone Tile Cleaning in Beyton

We were called into Clean and Seal 36m2 of Sandstone tile flooring installed in the Kitchen, Utility, Hallway and Cloakroom of a house in the Suffolk village of Beyton. The sandstone floor tile was laid around 10 years prior, the tiles had never been sealed and despite regular cleaning the riven surface had become a natural home for dust and grime.

Sandstone Tile Cleaning

Cleaning the floor was straight forward using a dilution of Tile Doctor Pro-Clean which is a very effective and flexible cleaning product recommended for natural stone surfaces, it was a large area so we used around 5 litres in total. We washed the floor down with clean water to remove any remaining product and then left it to dry over night.

Sandstone floor before sealing Sandstone floor before sealing

Sealing Sandstone Tile

The sandstone tile sealer we chose for the floor was Tile Doctor Colour Grow, it leaves a matt finish as opposed to a shiny polished effect but it does bring out the colour in the Sandstone tile, we used around 5 litres of sealer to complete the floor.

Sandstone floor after cleaning and sealing Sandstone floor after cleaning and sealing

 

Cleaning and Sealing Sandstone Tile Floor