This sandstone flagstone floor measured around 15m2 and was installed in a house in the village of Boxford, Suffolk, you can see how dark the stone had become from the build-up of dirt and soil over time, clearly they were in need of a deep clean and seal.
We cleaned the floor using Tile Doctor Pro-Clean diluted with 10 parts warm water and worked in using a Black Scrubbing pad. This action certainly gave the floor a good clean but there were some staining that was proving stubborn to shift so we tried a stronger product called Remove and Go combined 50/50 with NanoTech UltraClean which add nano sized abrasive particles into the mix. We left the resulting formula to soak into the sandstone for about a while and then used a steam to penetrate deep into the pores of the stone and lift out the dirt, this did the trick and so we then removed the cleaning products with a wet vacuum and washed down the floor with clean water to neutralise the floor before sealing and left for the evening so the floor could dry overnight.
Sealing a Sandstone Tiled Floor
We came back the next day, the floor had dried overnight so we proceeded to seal the Sandstone with Tile Doctor Seal and Go which gives a nice low sheen finish; Sandstone is fairly porous so it took five coats of sealer in the end. Seal and Go is a topical sealer which works well on Sandstone to really bring out the veins and natural colour in the stone, it also leaves them a lot easier to clean as flagstones invariably have a rough riven surface.
This Pamment tiled hall was in a Grade II listed former Manor House in the village of Creeting St Peter, there were three areas of floor requiring attention two having being recently laid and the other the original floor. Similar to Terracotta, Pamment tiles are made from Clay and have been traditionally used throughout Norfork and Suffollk.
Cleaning Pamment Tiles
I started the job using a solution of Tile Doctor Pro-Clean, which is a heavy duty cleaner ideal for stone, tile and grout. The cleaner was diluted with water and left to soak into the Pamment tile and grout for about 10 minutes before being scrubbed in with a black pad fitted to a rotary machine. The soiled solution was then removed with a wet vacuum and washed down with clean water to neutralise the floor of any chemical; we repeated this process a couple of times and we also used a stiff hand brushes to clean up the grout lines. Once happy the floor was given a final rinse and left to dry overnight, A dehumidifier was left running to ensure that the floor would be dry enough to seal the next day.
Sealing Pamment Tiles
The next day came back to do the sealing and after checking the floor had dried sufficiently proceeded to seal it . Tile Doctor Seal and Go was used to seal the floor, it’s a water based sealer so it doesn’t give off an odour when it’s drying and also offers durable stain protection together with a low sheen finish which enhances the look of the tile. Like Terracotta Pamment tiles are very porous and took seven coats of sealer r before it was fully sealed.
The work took two days in all and now the floor is much easier to maintain.
This terracotta floor was in a 1950’s style property in the village of Cringleford near Norwich. In total there was 13m2 of tile laid in the kitchen and conservatory around fifteen years ago. The floor had been given very little treatment since then resulting in the tiles looking faded and dull.
Cleaning Terracotta Tile
I started the job using a solution of Tile Doctor Pro-Clean, which is a heavy duty alkaline product ideal for cleaning natural products such as Terracotta, this was scrubbed in with a black pad fitted to a rotary machine. We used 3 litres of Pro-Clean in total having had to repeat the cleaning a couple of times, we also used stiff hand brushes along the grout lines where the pads can often struggle to reach. Once happy the floor was clean it was given a thorough rinse to remove any remaining chemical and left it to dry overnight. A dehumidifier was left running to ensure that the floor was dry enough to seal the next day.
Sealing Terracotta Tile
The next day came back to do the sealing and checked the floor first for any spots we might had missed and also to ensure it had dried sufficiently. Tile Doctor Seal and Go was used to seal the floor, it’s a water based sealer so it doesn’t give off an odour when it’s drying and also offers durable stain protection together with a low sheen finish. Terracotta is very porous and in the end the floor actually took seven coats of sealer requiring three litres of Seal and Go before it was fully sealed. Applying a sealer does takes a long time to apply as you have to wait for it to dry before applying the next coat.
The work took two days in all and you can see the difference for yourself, the floor now looks wonderful and will be a lot easier to maintain going forward.
This Limestone tiled floor was around 50m2 and installed in Kitchen and Hallway in a new build style property in Newmarket, ‘The Home of Horse Racing’. The property was only 3 years old and the owner was having difficulty keeping the floor clean.
Cleaning Limestone Floor Tiles
The first step was to scrub the Limestone tiles with a rotary machine fitted with a black scrubbing pad and a solution of Tile Doctor Pro-Clean which is a strong multi-purpose alkaline cleaning product designed for use on natural stone. This process ended up taking all day and requiring a full five litre bottle of Pro-Clean to get the floor how we wanted it, It was after a reasonably large area and we had to repeat the process in some areas.
The floor was then rinsed thoroughly with clean water to remove any cleaning products and we then we switched on the under floor heating and left for the day so the floor could dry overnight.
Sealing Limestone Floor Tiles
When we came back the next day the floor was nice and dry and we set about sealing the Limestone tile with Tile Doctor Colour Grow which provides stain resistance and enhances the natural colour within stone, three coats were sufficient but again due to the size of floor we did use a full five litre bottle.
The floor now looks splendid and the sealer has made it a lot easier to maintain, certainly the customer was pleased and left the following comment on our feedback system.